Ir directamente al contenido
How to Make a Clock Timelapse Video With MIOPS Smart+

How to Make a Clock Timelapse Video With MIOPS Smart+

Making a timelapse video is both creative and fun. So, please try it at home. Shooting a single frame of video at a certain amount of time with the interval such as one frame per minute or second you choose are the basics of creating a timelapse. When you play the video backward, it will look like the time and events speed up and go faster.

You don’t need to have a studio or so much equipment to take a timelapse video. All you need is a DSLR camera, a subject, a composition, and a Smart+ to make the entire process so much easier. Before mentioning the behind-the-scenes of our shooting, let’s have a look at some quick tips about the timelapse video below. 

clock timelapse video

Quick Timelapse Video Tips

Timelapses are silent movies in general. But of course, you choose to add some music after you finished shooting with video editing software to make it more catchy and appealing. Using a sturdy tripod will help you to create a more steady visual and will prevent your camera from moving. 

We advise you to adjust the exposure and focus settings manually so take your camera into manual mode. In this way, nothing will change from one shot to another. Set the shutter speed to a 1 or 2-second exposure. 

Turning off auto white balance also will be useful. Don’t forget to take a few test shots to calculate the exposure and set focus before the actual shooting. 

Setup Your Smart+. You can find the details about the Smart+ camera trigger in the behind-the-scenes section.

What You Need for Creating Clock Timelapse Video

  • DSLR camera (Our choice was Canon)
  • Tripod
  • Old school Alarm Clock
  • Smart+ camera-remote trigger
  • Plain surface to put the clock on 
  • Light source
timelapse video with camera trigger

Camera Settings: 

  • Camera: Canon 6D
  • Lens: Canon EF 24-105 mm Zoom Lens
  • Tripod: Manfrotto MK190XPRO3-3W
  • ISO: 400
  • Aperture: 1/125
  • Shutter Speed: f/4
smart camera trigger

Smart+ Settings:

MODE: Timelapse 


Behind the Scenes of Clock Timelapse Photoshoot: Capturing the Hour and Minute Hands

For creating a timelapse video, we’ve made a timelapse photoshoot with Smart+ remote trigger using an old school alarm clock. Like we said before, you should definitely try this at home. It's easier and you will get beautiful results if you own a Smart+! 

We prefer to use Smart’s Basic Timelapse Mode for this video shoot particularly and set the interval to 1 second. It means the camera takes a 1 frame photo for each second. In basic timelapse mode, the camera will shoot according to its exposure settings. 



Take impossible photos by turning your camera into a high-speed capture device!


We set the frame count value to 3,600. Through this way, we were able to capture 3,600 frames, as a result after 1 hour we got 3,600 frames of photos. Then we downloaded the final footage to the Adobe LightRoom program.

After that, we edited the photos along the 24fps (frame per second) value to create a timelapse video. (24fps means you will have 24 frames of video footage per second.)

At the end of this process, we were able to capture and combine the movement of hour and minute hands' movements and finaly convert the 1 hour long video into a 2,5 minutes long video.

Watch the Behind-the-Scenes Video:

Try This At Home, It’s Easy With MIOPS Smart+!

If you enjoy creating especially timelapses, making a clock timelapse can be a good choice for you. You can also take a timelapse of melting ice cream or a beautiful sunset if you love to be outdoors. We’re excited to see the perfect results that you’ll create with your Smart+! Don’t forget to share them with the #miopstrigger hashtag on Instagram

Watch the Timelapse Video:

Would You Like to Join Our Writers Club to Share Your Photography Knowledge and Experience With The Readers From All Around the World? 

Send a short bio of yourself and a draft article to 

Carrito 0

Su carrito está vacío.

Empieza a comprar